17 Killer Project Management Best Practices for Managers

April 9, 2018
12 minute read

If you're a project manager, developing and adopting project management best practices is likely one of your top priorities. This article will share a comprehensive list of best practices for project management every organization needs.

 Are you happy with your project performance? Do your projects usually come in under budget and ahead of schedule?

If you’re like most agencies, your answer will likely be “no”.

Effective project management is often the “secret sauce” of an agency’s success, more so than sheer creative brilliance.

Being good at managing projects is usually a matter of following project management best practices. These “best practices” are usually derived from project management methodologies, international standards, industry conventions, and the organization’s own guidelines from past projects.

As PMI says, any “way of doing things” within an organization can be considered a best practice.

Often, these “best practices” will vary from organization to organization. Some, however, are applicable across organizations and can radically improve project performance.

I’ll share 17 such best practices below.

 

1. Ensure that all stakeholders understand the requirements

Stakeholders_advice

 

A common factor in failed projects is a lack of uniform understanding of the project's requirements among stakeholders. If your project team and client have different estimations of the project's scope, you're going to run into problems.

To solve this issue, get all stakeholders together in the concept phase. Ask them the following questions to ensure that they're on the same page about the project's requirements and scope:

  1. What are the project's deliverables?
  2. What are the project's goals and realized benefits?
  3. What is the expected product/service/result of the project?
  4. How do you define "success" for the project and its key deliverables?
  5. What defines the validity or completeness of the key deliverables?
  6. Are there any risks everyone should be aware of?
  7. What are the project budget, time, and performance constraints?

 

2. Create a risk response team

Things can - and often will - go wrong. A key resource might drop out, a stakeholder might pull funding, and an important tech component might break.

Ideally, you would have all these issues accounted for in your project risk management plan.

Another best practice to mitigate risk is to create a risk response team. This team should be comprised of experienced members who have wide-ranging access to plan, monitor, and control risks in the project.

Its most important job, however, is to swing into action in case of emergencies. The team should have the experience and training necessary to save projects when mishaps happen.

Essentially, your risk response team should think of worst-case scenarios and develop contingency plans.

For instance, in a creative project, a few key resources dropping out can derail the project completely. In such a case, the risk response team would be tasked with finding backup resources, both within the company and outside it.

Also read: Why do creative projects fail (and what to do differently)?

 

3. Develop and formalize project management roles

Project management isn't just the project manager's responsibility. If you dig deep, you'll find that several people within your organization perform some PM duties, formally and informally.

One of the more popular project management best practices is to identify, develop, and formalize these roles.

For example, a senior developer regularly assists the project manager in developing a schedule. While this developer might have experience, he doesn't have the formal knowledge or executive powers to perform his project management role adequately. A little bit of training and formalization of his role can help him become a better project scheduler.

Carefully analyze your past projects and take stock of every person within the organization who played a role in project management.

Ask yourself: Does this role need to be formalized? If yes, what certifications and training are necessary to improve performance in this role?

You'll find that getting people to "level up" in their PM responsibilities takes the burden off the project manager and improves project performance across the board.

 

4. Develop leadership competencies alongside technical competencies

Often, organizations focus too heavily on their project managers' technical competencies (i.e. their formal PM knowledge, certifications, etc.). As a result, the "softer" side of project management - leadership, empathy, people skills, etc. - suffers.

Given how heavily project managers interface with clients and internal stakeholders, it is crucial that you help them develop their leadership competencies alongside their technical ones.

Leadership capabilities are particularly important when you're dealing with a complex set of resources - as in an agency setting. You can't always develop a schedule for creative work and expect it to be 100% perfect every time. Often, you'll have to use leadership, motivation, and empathy to get creative talent to do its best.

As Victoria Kumar says in a PMI paper - "leaders innovate; managers administer".

Leaders


Help your project managers develop their leadership skills and your projects will prosper.

Also read: The key competencies of effective project managers and how to develop them (including leadership skills)

 

5. Adopt better scheduling standards for technical work

More than half of IT projects fail. One meta-analysis of failed projects concluded that a vast majority of IT projects fail because of process mistakes (45%) or people mistakes (43%).

 

it-project-failure

 

If you're dealing with technical work, one of the most important things you can do to improve your success rate is to use better scheduling and estimations. Technical work has a tendency to "bloat" beyond your original estimates, leading to budget inflation and delivery delays. It doesn't help that the people involved in scheduling and estimating - project managers - often don't have an understanding of the actual technical issues involved.

One way to solve this problem is to use developer-based estimating. This means giving over the reins to your development team and asking them to create a schedule. Since these are the people closest to the work, their estimates are liable to be more accurate.

Other ways to improve scheduling is to use algorithms such as COCOMO II, historical data for similar projects, and scheduling software such as QSM SLIM-Estimate, SEER-SEM, etc.

 

6. Define and evaluate quality standards throughout the project's lifecycle

A common problem in creative projects is the rather ill-defined idea of "quality" all deliverables have to adhere to. What might be an excellent result for one client can be sub-par for another.

As James N. Salapatas notes in a PMI article:

 

quote

 

You should have a clear idea as to what constitutes "quality" throughout the project's lifecycle. This must be based on standards acceptable to every stakeholder, especially the people on both sides who have to sign off on the final deliverables.

Some ways to do this are:

  1. Break the project into multiple stages. Get stakeholders to sign off on deliverables at each stage.
  2. Establish objective criteria for quality measurement. This can be hard for creative work, but comparing against industry benchmarks and the client's past projects works well.
  3. Document and share processes with stakeholders on both sides. Often, showing the path to the end result validates its quality as well.
  4. Establish a baseline for quality that all stakeholders agree to. As long as the project meets this baseline, it would be considered "successful".
  5. Back claims with data whenever you can. For example, if you want to show the impact of a new website design, run a quick A/B test to show how it compares to the previous one.

 

7. Make your project more transparent

 

jeff_quote

 

As one researcher notes, in the context of project management:

"Transparency implies that in the hierarchy of management every employee will know what he or she needs to. By enabling a transparent project management system, everyone benefits from those working on the project to those sponsoring and auditing it."

Essentially, it means making your project data more open. Instead of simply assigning milestones to an individual, show them how their work ties into the rest of the project.

This can create a greater sense of responsibility within the team ("I don't want to hold up my team members' work") and a sense of achievement ("I helped build this crucial component"). Knowing how an individual's work interfaces with the rest of the team can also enhance teamwork and prevent projects from being derailed because of a single individual.

Besides milestones and tasks, there are a number of other project activities that can benefit from greater transparency:

  1. Project communication: Enabling transparency in project communication helps team members see the entire process that leads to a decision and not just the decision in itself. Opening up communication to everyone can also help in decision-making by leveraging the "wisdom of the crowds" model.
  2. Project budget and time: Sharing the amount of budget and time consumed/available can help team members orient themselves better and evaluate their own priorities. You don't have to share detailed project budget data; just the part that impacts the team's work.
  3. Project changes: If there is any change in the project's scope, budget, or deadline, keep your team cued in. Explain to them what exactly changed, why it changed, and how it impacts their work. This can improve team morale and help them trust you more.

8. Emphasize the project's "purpose"

In an earlier article on the collaboration habits of the world's best managers, we talked about the importance of highlighting the "why" of any project.

This "why" is the purpose of the project, the project team, and their work.

As E&Y's study reveals, purpose-driven organizations boast higher employee satisfaction, better quality products, and greater customer loyalty.

 
Focusing on each project's purpose is crucial in an agency setting. It's common for one employee to work on multiple projects simultaneously within the agency. If the employee doesn't know how his work contributes to the project's or the business’s success, it can lead to long-term demotivation and dissatisfaction.

This rule applies to outside contractors as well. Freelancers often have limited visibility into the project and the organization’s goals. This forces them to focus on short-term deliverables, not the long-term impact of their work.

Solve this problem by focusing on the purpose and impact of the project. Share results - current or expected - with team members. Tell them how the project can help the client grow revenues, improve customer satisfaction, etc. If the project has an environmental component, make it clear to the team as well.

 

9. Build a “super team” to take care of repetitive tasks

In any agency, you’ll likely have a series of tasks that need to be performed on a regular basis on most projects. Sometimes, the people performing these tasks can become better at them simply by virtue of doing them repeatedly.

A best practice to maximize the impact of your resources would be to create a “super team” of experts trained in specific, repetitive tasks. This team would not be affiliated with any particular project or team. Instead, they would move from project to project, performing just the target task.

For example, a marketing agency might need to undertake an SEO audit for all new clients. Instead of a person within each team handling this task, you can create a team of SEOs who focus only on performing audits.

This team would come in at the start of each project, run an SEO audit, and move on to the next project.

Such specialization can bring in much-needed efficiencies if you work with a large number of similar clients.

Also read: How investing in resource management software can help you get the most out of your employees

 

10. Find the "Goldilocks Zone" for multiple team membership

It is increasingly common for one employee in an agency to be a part of multiple teams. Contrary to popular belief, multiple team membership (MTM) can actually improve individual employee performance - until it doesn't.

Being a part of several teams improves individual performance since the person gets exposed to different ideas and perspectives.

However, once this improved performance hits its peak, the cognitive load of task switching and fragmented attention takes a toll. Beyond a point, being a part of any additional teams has a negative effect.

As one study points out, MTM and performance follow an inverted U-shaped curve.

 

graphic

 

Which is to say, there is a "Goldilocks Zone" of multiple team memberships that is just right for individual and team performance.

Finding this perfect point that balances performance and MTM can be hard. Following these pointers can help:

  • Select people who have demonstrated comfort with task switching for high MTM situations
  • Assign low-level tasks with limited cognitive impact to people who are a part of multiple teams
  • Monitor project performance closely and reduce membership to multiple teams if you see a drop in individual performance

 

11. Check in frequently and regularly

In 2015, Deloitte performed a wide-ranging study to evaluate its performance management system. The study revealed that for a majority of managers (58%), the existing system was inadequate in improving employee engagement and performance.

 

graph

 

To combat this, Deloitte completely overhauled its existing performance management system.

At the heart of the new system was the weekly check-in.

As one Deloitte leader put it:

 

quote

 

Checking in regularly and frequently is one of the easiest project management best practices you can adopt, and certainly among the most impactful.

Regular check-ins create a sense of accountability and shared responsibility between managers and team members. It tells your people that there is someone looking over their shoulder and is ready to help them improve, when necessary.

Check-ins are even more important if you have remote employees. In a survey of 1,100 remote workers, 46% said that the most successful managers checked in regularly with them.

The same study revealed that the frequency of check-ins doesn’t matter as much as the consistency. You can check in daily, weekly, bi-weekly, or monthly; as long as you do it on schedule every time, you will hold your team accountable.

12. Consolidate all project-related information and data

Your project management best practices will often spring from your organization's experiences and knowledge. Having all project-related data in a single place can help you leverage this past knowledge to deal with future issues.

Think of consolidating all project-related information into a centralized knowledge base. Anyone working in project management-related roles should be able to freely access this information.

Here are a few things that can be a part of the knowledge base:

  1. Tools, templates, and project-related software
  2. Project schedules and budgets
  3. Past project information, especially lessons learned from project post-mortems
  4. A catalog of all organizational project resources
  5. A list of all project management best practices
  6. Collaboration forums/chat groups

This can be a powerful resource for all current and future project managers. Keeping it up to date should be a priority for all project roles.

 

We make Workamajig, the all-in-one project management suite built for creative teams

  • Everything in one place
  • Project Management
  • Resourcing & Scheduling
  • Task Management & Time Tracking 
  • Custom Dashboards
  • Business Insights

13. Track and correct deviations from project plans

It is inevitable that your team will stray from your originally conceived plans. They'll miss deadlines, go over budget, and find risks not covered in your risk management plan.

One best practice that can improve current and future project performance is to track all these deviations and correct them as quickly as possible. Gather reports and hold meetings regularly to identify when things are going off-target. As long as you are within the baseline originally stated in the project plan, you are doing well.

Tracking the following metrics can help you in estimating your deviation from the project plan:

  1. Budgeted Cost of Work Performed (BCWP): Your planned budget for the work completed by any given date.
  2. Budgeted Cost of Work Scheduled (BCWS): Your planned budget for the work scheduled by any given date. The difference between BCWS and BCWP tells you how far you are from your original deadlines.
  3. Actual Cost of Work Performed (ACWP): How much of the budget you've actually used by any given date? The difference between ACWP and BCWP gives you a deviation from the project plan.

Keeping a close eye on these metrics can help you take corrective measures before the project goes off-budget.

 

14. Develop a process to escalate issues correctly

A common cause of project failure is that important stakeholders and sponsors aren't alerted to issues until it is too late. Problems that can be solved by senior people often linger at the bottom of the organization for fear of rebuke or censure.

You can combat this by creating an issue escalation process for the project.

Start by developing an issue escalation matrix as part of your project management plan. This matrix should have two key components:

  1. A process to identify the intensity or magnitude of an issue
  2. Escalation paths for different issue levels

Besides the issue escalation matrix, there are a few other best practices you can adopt to ensure that issues are resolved correctly:

  1. Create a culture where team members are comfortable escalating issues to higher management without fear of censure
  2. When dealing with outside vendors, wait for their service level agreements before escalating the issue
  3. Escalate only one issue to only one stakeholder at a time. Don't involve stakeholders who aren't affected by the issue.
  4. When escalating issues, identify the intensity of the problem, give contextual data, and offer suggestions on corrective measures

 

15. Practice empathy

 

quote

 

The last, but certainly the most important best practice, is to practice empathy.

Empathize with your clients, your resources, and your end users. Understand their problems, their needs, and their challenges. No project exists in isolation; if you're creating something, it will affect real people in some very real ways.

Practicing empathy will help you understand the true impact of your work and how you can do it in the best possible way.

Empathy is particularly important in creative agencies. The work you do will often go out in the world and be seen by thousands, even millions. It will impact careers and entire companies. Knowing how the project affects end users, clients, and stakeholders will help you deliver better results.

There is no prescription for practicing empathy; you just have to place yourself in the shoes of other people. Think of everyone involved in the project and how it affects them. Identify what they truly want to achieve with it. The client might want more sales, but the senior stakeholder might want to use the project to jockey for a promotion.

Similarly, a stakeholder on your side might see the project as his "baby". His motivations to promote it will be very different from the client.

Take cognizance of all these different perspectives when you're planning the project and you'll see your success rates skyrocket.

 

16. Conduct Regular Client Status Meetings

Checking in regularly applies not just to team members, but also clients. It's easy to slip into a pattern of reduced communication when you're dealing with a client who, according to you, is "happy". But unless you check in regularly, you might not know if the client is truly satisfied or not.

From a project manager's perspective, frequent client contact can also be good for your job. When the client is in the loop the whole way through, feels like you are communicating everything, and feels like you have their best interests in mind, they are rarely unhappy. They are willing to work with you, not contact your CEO and complain about you.

To formalize this process, consider conducting regular client status meetings. Ideally, you need to be held at least once a week to keep everyone engaged and on the same page. Your client is likely busy, but you want to keep them engaged and available to you even if they are booked on their real day job. Assign them a few tasks to manage and ritually conduct weekly project status calls... you won't be sorry.

 

17. Become Politically Savvy

As project managers, we need to understand our team and their individual characteristics as much as possible. Each person is an individual – knowledge of human nature will go a long way in making a skilled project manager and also a good resource manager. Know how your team works – know their chemistry. Having a good understanding of human nature will give you insight into how to manage and motivate your team to accomplish the goals of the project.

A part of this is understanding politics. As much as we may hate the political side, we need to be – or become – politically savvy. There are going to be those times when we have to negotiate, be connected, and pull some strings in order to get certain things done on the project and for the project.

This usually occurs when you’re trying to obtain a key resource or get a roadblock handled by someone in your organization. At any rate, it is important that the project manager be somewhat politically savvy in order to get key work accomplished.

Network in your organization and gain visibility if you don’t have enough of it yet. The quiet project manager doesn’t get the things he needs for his project.

 

Over to You

There are countless other project management best practices. You might already be using some of them. Others might not benefit your organization at all. The important part is to track your own best practices, adopt and test new ones, and maintain a knowledge base that lists everything you do to improve your project management practices.

***

What are some of your organization’s favorite best practices for project management? Share them with us below!

 

Related Posts

Run Better Projects Sign up for our free project management resources.

Get all our templates, tips, and fresh content so you can run effective, profitable, low-stress projects in your agency or team.